RD-Series®

RD-Series®

Check Valve

The Pratt® RD-Series Check Valve has only one moving part: a resilient disc reinforced with steel. This simple, innovative valve provides dependable, maintenance free performance, and quiet operation with its inherent non-slam construction. The large, unobstructed flow path makes the valve an excellent choice for wastewater as well as water applications. The design has undergone a rigorous 1,000,000 continuous cycle test with no signs of wear or distortion to the valve disc or seat. All sizes have a 250 psi rating.

Specifications: 

  • Sizes:
    • 2" through 24" flanged ends
    • 3" through 16" mechanical joint ends
  • Body: Ductile Iron in ASTM A-536 Grade 65-45-12, and features a full flow area providing 100% unrestricted flow and low head loss. Flanges are in full compliance with ANSI B16.1, Class 125.
  • Bonnet: Ductile iron domed access bonnet allows for easy removal and inspection of the flexible disc assembly.
  • Disc: The only moving part, featuring a fully Buna-N encapsulated steel disc with nylon reinforcement in the flex area. The molded elastomer with integral O-ring ensures a bubble-tight shut off, without backflow. 
  • Seat: Constructed on a 45° angle to reduce the travel of the disc to the full open position; significantly reducing the potential for water hammer. 
  • Flow: The flow area is equal to or greater than the equivalent pipe size throughout, resulting in low head losses, compared to other types of check valves.
  • Installation: Suitable for both horizontal and vertical pipelines with flow upward.
  • Coatings: The valve interior is fully coated with liquid thermosetting epoxy suitable for use in potable water service. The exterior is provided as standard with a universal primer enamel suitable for coating in the field. Special coatings can be furnished on request.
  • Accessories/Options:
    • Disc position indicator
    • External backflow device - to manually open disc
    • Proximity limit switch - to transmit an electrical signal to indicate when disc is open or closed
    • EPDM disc option
    • Stainless steel cover bolts
  • Complies with AWWA C508 Standards
  • NSF/ANSI 61/372 Certified

Resources: 

  • 3"-16" MJ Ended RD Series Check Valve Submittal Drawing (GA-1845B)
  • 3"-16" Flange Ended RD Series Check Valve Submittal Drawing (HP-50634)
  • 3"-16" Flanged Ended RD Series Check Valve w/Backflush Dev Submittal Drawing (HP-50635)
  • Mechanical Indicator for 3"-16" RD Series Valves Submittal Drawing (HP-50639)
  • Mechanical Indicator w/limit switch for 3"-16" RD Series Submittal Drawing (HP-50641)
  • 2"-2.5" Flange Ended RD Series Check Valve Submittal Drawing (HP-50644)
  • 18"-24" Flange Ended RD Series Check Valve Submittal Drawing (HP-50657)

Brochure          Manual          Specifications          BIM 3D Models